Body Rot II

The Body Rot II started off with the heart of the original Body Rot and an added tone stack... but that wasn't enough.

With so many boutique companies jumping on the ultra heavy distortion band wagon Pro Tone started with the Original Body Rot, we knew we had to create something massive. We knew that the Body Rot II had to be something that would send a jolt to the competition and silence the naysayers.  

• Operates on a standard 9 volt battery or BOSS style adapter - Please specify what you prefer when ordering.
• Stomp switch built to withstand 30,000 stomps.
• Durable aluminum housing.
• Color Coded LED for easy onstage identification
• Proudly built by hand in Cross Roads, Texas.

Harmony Central Review

Fast Lane

The Fast Lane is of interest to anyone that wants to remove a noisy pedal from their signal chain when its not in use. The Fast Lane removes those effects from the signal flow in order to protect your tone. All you need to do is stomp a switch and its back in the signal again ready to do what its job.

• Operates on a standard 9 volt battery.
• Stomp switch built to withstand 30,000 stomps.
• Aluminum housing with a tough-as-nails powder coat finish.
• Hand built Point to Point construction.
• Color Coded LED for easy onstage identification
• Proudly made in Texas, USA.

Lithium

The Lithium Analog Chorus is an amazing sounding mono chorus pedal that gives you the ability to recreate vintage chorus tones of the past or to create your own astonishing chorusing and vibrato effects.
The Rate control travels from a nearly inaudibly slow rate to ludicrous-speed providing versatility and range unavailable in most chorus pedals.
The depth control allows you to fluctuate the strength from a soft & easy chorusing effect to a warbling mess that would make Cobain proud.

The Lithium features

• The legendary Texas Instruments 4558 op amp
• Operates on a standard 9 volt battery or optional BOSS style adapter.
• True By Pass stomp switch built to withstand 30,000 stomps.
• Aluminum housing with a tough-as-nails powder coat finish.
• Color Coded LED for easy onstage identification
• Proudly made in Texas, USA.

Harmony Central Review

Back to Top

Mach II

The Mach II consists of 2 Thruster circuits, 2 foot switches, 2 LEDs, and 3 knobs- oh yes folks 3 knobs... all in one little box!
You now have total control over the Mach II's gain stages. In addition, you also get a Master control that allows you to use it as an overdrive/distortion unit without changing your signal volume.

Stage 1: This gain stage is a regular Thruster... not that there is anything regular about the Thruster, but you get the idea. Stage 1 has no Master Volume control, it feeds into Channel 2, which makes full use of the Master Volume control.
Stage 2 and the Master- Stage 2 is made up of the exact circuit as stage 1, but is fed from the output of Stage 1, and then goes directly to the Master control. The Master control allows the user to keep the output volume under control when stages 1 and 2 are set high. .

• Operates on a standard 9 volt battery or optional BOSS style adapter.
• Stomp switch built to withstand 30,000 stomps.
• Durable aluminum housing.
• Hand built Point to Point construction.
• Color Coded LED for easy onstage identification
• Proudly made in Texas, USA.

Harmony Central Review

Back to Top

Monster Fuzz

Pro Tone Pedals and renowned artist Felix LaFlamme have teamed up once again to bring you the most monstrous effects pedals around.

The Monster Fuzz is an unruly fuzz spitting beast capable of the most amplifier abusing fuzz around. but like most monsters this one has a soft side... a sweet underbelly if you please... good luck finding it!

• Operates on a standard 9 volt battery or BOSS style adapter
• Stomp switch built to withstand 30,000 stomps
• Durable aluminum housing
• Bright Red LED for easy onstage identification
• Proudly built by hand in Cross Roads, Texas

Harmony Central Review

Back to Top

Rhino

Thick slabs of dual octaves down with a chunk of fuzz on top! The Rhino will give you unprecedented heaviness with a touch of mystery.

• Operates on a standard 9 volt battery or optional BOSS style adapter.
• Stomp switch built to withstand 30,000 stomps.
• Durable aluminum housing.
• True By Pass switching.
• Color Coded LED for easy onstage identification
• Proudly made in Texas, USA.

Back to Top

T.V. Delay

Pro Tone resisted going digital for some time now. We waited until we could get analog warmth in the digital realm. We believe that we've accomplished exactly that.

The T.V. Delay is currently in use by Tommy Victor of Prong & Ministry.

The Delay control adjusts the delay time. The Level control offers the user full control of the balance of wet and dry signal. The Repeats control determines the number of repeats. Full counter clock wise allows one repat to come through, while full clockwise allows endless repeats to create lush sonic landscapes.

• Operates on a standard 9 volt battery or optional BOSS style adapter.
• True By Pass stomp switch built to withstand 30,000 stomps.
• Aluminum housing with a tough-as-nails powder coat finish.
• Color Coded LED for easy onstage identification
• Proudly made in the USA.

Back to Top

• Soundwaves Multimedia provides 7 days 1 to 1 exchange for products with manufacturing defects subject to stock availability.
• All goods sold are non returnable unless there are manufacturing defects.
• All products comes with 1 year warranty. Customers must produce original sales invoice for warranty claims. Manufacturers may offer a longer period of warranty. Soundwaves Multimedia will repair minor problems during the period of warranty. Products will have to be returned to manufacturers for major servicing. Customers must bear the cost of shipping for return to manufacturer.